Stainless Steel Manual PCB Depaneling Machine Hand Push With Steel Blades
CAB PCB Depaneling Machine MAESTRO 4M YESM PCB Separator Features:
1. Round knife, manually cutting against lower linear knife,
for reduced stress
2. Separate pre-scored PCB assembly without stress on either
PCB or component
3. Separating speed is adjusted by handwheel
4. Handle Intermittent scoring or cut-outs
5. Board with projected component can be cut precisely
6. Large stainless steel platform on both side of cutting blade prevents board wobble and table height and angle are adjustable.
7. Clearance between circular and linear blades are adjustable to fit different groove depth and compensates for blade wear out .
Specification:
The pre-scored grooves can be interrupted by any number of cutouts.
If components project above the groove,the linear blade needs to be cut out, in such a case,contact us.
| Technical Date |
| Separator type | Components side circular blade
Solder side linear blade |
| Operation | By hand |
| Separation length | Max 450mm |
| Separation speed | Adjustable by hand |
| mains voltage | dual voltage 230/115v 50-60H |
| Earthing stud | Φ10mm |
| Operation temp | 15-25°C |
storage/transport
temperature | -20-50°C |
humidity.
non-condensing | 10-85% |
| weight | 22kg |
| Dimensions | 450*350*700mm |
the machines comply with the safety
regulations of the EC directives |
Customers FAQ About PCB Separator YESM:
1. Q:Do you have any certification for this machine?
A:YES,We have CE ISO FCC ROHS etc. |
2. Q:What is warranty of the machine?
A:1 year. |
3. Q:How do you pack the machine?
A:We fix the machine on the plywood base with screws to ensure safe transportation. |
4. Q:What is life time of machine blades?
A:About 6-12 months. |
CAB Off Cut Remove Hektor 2 YES-H PCB Separator Features:
| 1.Upper blade and lower blade are made of special material and durable. |
| 2.Minimize the shearing stress to avoid micro-cracks of the soldering joint. |
3.It is applicable for complex structure of double-panel, with different
thinkness of cutter can fit to different width of V-groove. |
| 4.Easy and convinence to change the cutter . |
5.Reliable operate and high efficinence for Pneumatically driven ,footswitch
control. |
6. Supporting PCB with four supporting pin to keep PCB lever to improve
the quality of cutting ,otherwise, easy to move the supporting pin . |
| 7. The thickness and the height for cutter can be custome made . |
| 8.Easy to fetch and give for waste box |
